Analytical Investigation of Maximum Stresses According to the (hkl) Layers at Stable Condition for Al-Sc Alloys
Abstract
Al-Sc alloys are used
in the industry due to the various properties. There is an interest of
researcher for theoretical and experimental study for this alloy. The
Importance of this alloy is that the effect of small concentration addition of
Scandium has a great effect on the chemical and physical properties of alloys.
In this study Al-1,1Sc and Al-1,9Sc alloys are studied experimentally and
theoretically. Produced alloys are investigated by XRD analysis that results
showed that the alloys have fcc crystal structure. The experimental results are
used to calculate many elastic properties of the alloys by a software (EMTO).
By using the experimental data, peak wideness, crystal size, dislocation
density, Young’s constant and maximum stresses on (hkl) layers are determined
and discussed. According to the results of this study, it is observed that the
parameters depend on the related crystal layers and Al-1,1Sc alloy has better
mechanical properties than Al-1,9Sc alloy.
Keywords
References
- Prof.Dr. Necmettin MARAŞLI Yıldız Teknik Üniversitesi KİMYA-METALURJİ FAKÜLTESİ MET.VE MALZEME MÜH.BÖL. nmarasli@yildiz.edu.tr +90 212 3834684
- Prof. Dr. Sebahattin Tüzemen Atatürk Üniversitesi Fen Fakültesi Fizik Katıhal Fiziği Anabilim Dalı stuzemen@atauni.edu.tr / +90 442 231 4173
- Prof. Dr. Yusuf Şahin Atatürk Üniversitesi Fen Fakültesi Fizik Atom ve Molekül Fiziği Anabilim Dalı ysahin@atauni.edu.tr / +90 442 231 4156
Analytical Investigation of Maximum Stresses According to the (hkl) Layers at Stable Condition for Al-Sc Alloys
Abstract
Al-Sc alloys are used in the industry due to the various properties.
There is an interest of researcher for theoretical and experimental study for
this alloy. The Importance of this alloy is that the effect of small
concentration addition of Scandium has a great effect on the chemical and
physical properties of alloys. In this study Al-1,1Sc and Al-1,9Sc alloys are
studied experimentally and theoretically. Produced alloys are investigated by
XRD analysis that results showed that the alloys have fcc crystal structure.
The experimental results are used to calculate many elastic properties of the
alloys by a software (EMTO). By using the experimental data, peak wideness,
crystal size, dislocation density, Young’s constant and maximum stresses on
(hkl) layers are determined and discussed. According to the results of this
study, it is observed that the parameters depend on the related crystal layers
and Al-1,1Sc alloy has better mechanical properties than Al-1,9Sc alloy.
Keywords
References
- Prof.Dr. Necmettin MARAŞLI Yıldız Teknik Üniversitesi KİMYA-METALURJİ FAKÜLTESİ MET.VE MALZEME MÜH.BÖL. nmarasli@yildiz.edu.tr +90 212 3834684
- Prof. Dr. Sebahattin Tüzemen Atatürk Üniversitesi Fen Fakültesi Fizik Katıhal Fiziği Anabilim Dalı stuzemen@atauni.edu.tr / +90 442 231 4173
- Prof. Dr. Yusuf Şahin Atatürk Üniversitesi Fen Fakültesi Fizik Atom ve Molekül Fiziği Anabilim Dalı ysahin@atauni.edu.tr / +90 442 231 4156
Details
| Primary Language | English |
|---|---|
| Subjects | Engineering |
| Journal Section | Makaleler |
| Authors | |
| Publication Date | January 31, 2019 |
| Submission Date | October 30, 2018 |
| Acceptance Date | January 18, 2019 |
| Published in Issue | Year 2019 Volume: 6 Issue: 1 |
