Research Article
Year 2022,
Volume: 69 Issue: 4, 419 - 424, 30.09.2022
Abstract
References
- Aiyan AA, Menon P, AlDarwich A, et al (2019): Descriptive analysis of cerebral arterial vascular architecture in dromedary camel (Camelus dromedarius). Front Neuroanat, 13, 67.
- Brudnicki W (2011): Morphometric analysis of the brain base arteries in fallow deer (Dama dama). Vet Med, 56, 462–468.
- Chen S, Pan Z, Wu Y, et al (2017): The role of three-dimensional printed models of skull in anatomy education: a randomized controlled trail. Sci Rep, 7, 575.
- Cornillie P, Casteleyn C, von Horst C, et al (2019): Corrosion casting in anatomy: Visualizing the architecture of hollow structures and surface details. Anat Hist Embryol, 48, 591-604.
- De Sordi N, Bombardi C, Chiocchetti R, et al (2014): A new method of producing casts for anatomical studies. Anat Sci Int, 89, 255-265.
- Eberlova L, Liska V, Mirka H, et al (2017): The use of porcine corrosion casts for teaching human anatomy. Ann Anat, 213, 69-77.
- Estai M, Bunt S (2016): Best teaching practices in anatomy education: A critical review. Ann Anat, 208, 151-157.
- Fedorov A, Beichel R, Kalpathy-Cramer J, et al (2012): 3d slicer as an image computing platform for the quantitative imaging network. Magn Reson Imagin, 30, 1323–1341.
- Hermiz DJ, O'Sullivan DJ, Lujan HL, et al (2011): Constructivist learning of anatomy: gaining knowledge by creating anatomical casts. Anat Sci Educ, 4, 98-104.
- Jerbi H, Khaldi S, Pérez W (2016): Morphometric study of the rostral epidural rete mirabile in the dromedary (Camelus dromedarius, Linnaeus 1758). Int J Morphol, 34, 1429-1435.
- Kong X, Nie L, Zhang H, et al (2016): Do 3d printing models improve anatomical teaching about hepatic segments to medical students? A randomized controlled study. World J Surg, 40, 1969-1976.
- Li J, Nie L, Li Z, et al (2012): Maximizing modern distribution of complex anatomical spatial information: 3D reconstruction and rapid prototype production of anatomical corrosion casts of human specimens. Anat Sci Educ, 5, 330-339.
- Li K, Kui C, Lee E, et al (2017): The role of 3D printing in anatomy education and surgical training: A narrative review. MedEdPublish, 6, 31.
- Massari CHAL, Pinto ACBCF, De Carvalho YK, et al (2019): Volumetric computed tomography reconstruction, rapid prototyping and 3D printing of opossum head (Didelphis albiventris). Int J Morphol, 37, 838-844.
- Nomina Anatomica Veterinaria (2017): International Committee on Veterinary Gross Anatomical Nomenclature (ICVGAN), Prepared by the international committee on veterinary gross anatomical nomenclature and authorized by the general assambly of the world association of veterinary anatomists. Sixth Edition, The Editorial Committee Hanover (Germany), Ghent (Belgium), Columbia, MO (U.S.A.), Rio de Janeiro (Brazil).
- O'Brien HD (2017): Cranial arterial patterns of the alpaca (Camelidae: Vicugna pacos). R Soc Open Sci, 4, 160967.
- Ocal MK, Erden H, Ogut I, et al (1999): A quantitative study of the circulus arteriosus cerebri of the camel (Camelus dromedarius). Anat Hist Embryol, 28, 271-272.
- Selle D, Preim B, Schenk A, et al (2002): Analysis of vasculature for liver surgical planning. IEEE Trans Med Imaging, 21, 1344-1357.
- Shatri J, Cerkezi S, Ademi V, et al (2019): Anatomical variations and dimensions of arteries in the anterior part of the circle of Willis. Folia Morphol, 78, 259–266.
- Simoens P, Lauwers H, De Geest, et al (1987): Functional morphology of the cranial retia mirabilia in the domestic mammals. Schweiz Arch Tierheilkd, 129, 295-307.
- Wang XR, Liu Y, Zhang LP, et al (2012): Comparative anatomical study of the epidural retia mirabile in the yak and cattle. Asian J Anim Vet, 7, 884-890.
Evaluation of the compatibility between corrosion casts and 3D reconstruction of pig head arterial system on cone beam computed tomography
Abstract
This study aimed to compare the corrosion cast models of the porcine head arterial system with three-dimensional (3D) reconstructions using cone beam computed tomography (CBCT) of these cast models. Six heads from sows were simultaneously injected through both carotid arteries with Duracryl Plus for corrosion cast technique and an additional head, also from another one sow head, was filled with saturated lead tetroxide (Pb3O4) in a 10% hot water solution (40°C) of gelatin for CBCT study. Two-dimensional (2D) images were stored in Digital Imaging and Communications in Medicine (DICOM). Subsequently, segmentation and post-processing of these images were performed by using various software programs. The 3D models were found to be compatible with the corrosion cast models. It was observed that osseous structures and arteries were clearly identified on CBCT images. Specimen scan, segmentation, and post segmentation had a duration of 10-15 minutes, 4 hours, and 15 minutes, respectively. The internal carotid artery, external carotid artery, and its main branches were seen well on 3D models. In conclusion, it is considered that 3D models and images can be effectively used in anatomy education, radiological evaluations, pathological and variational investigations.
References
- Aiyan AA, Menon P, AlDarwich A, et al (2019): Descriptive analysis of cerebral arterial vascular architecture in dromedary camel (Camelus dromedarius). Front Neuroanat, 13, 67.
- Brudnicki W (2011): Morphometric analysis of the brain base arteries in fallow deer (Dama dama). Vet Med, 56, 462–468.
- Chen S, Pan Z, Wu Y, et al (2017): The role of three-dimensional printed models of skull in anatomy education: a randomized controlled trail. Sci Rep, 7, 575.
- Cornillie P, Casteleyn C, von Horst C, et al (2019): Corrosion casting in anatomy: Visualizing the architecture of hollow structures and surface details. Anat Hist Embryol, 48, 591-604.
- De Sordi N, Bombardi C, Chiocchetti R, et al (2014): A new method of producing casts for anatomical studies. Anat Sci Int, 89, 255-265.
- Eberlova L, Liska V, Mirka H, et al (2017): The use of porcine corrosion casts for teaching human anatomy. Ann Anat, 213, 69-77.
- Estai M, Bunt S (2016): Best teaching practices in anatomy education: A critical review. Ann Anat, 208, 151-157.
- Fedorov A, Beichel R, Kalpathy-Cramer J, et al (2012): 3d slicer as an image computing platform for the quantitative imaging network. Magn Reson Imagin, 30, 1323–1341.
- Hermiz DJ, O'Sullivan DJ, Lujan HL, et al (2011): Constructivist learning of anatomy: gaining knowledge by creating anatomical casts. Anat Sci Educ, 4, 98-104.
- Jerbi H, Khaldi S, Pérez W (2016): Morphometric study of the rostral epidural rete mirabile in the dromedary (Camelus dromedarius, Linnaeus 1758). Int J Morphol, 34, 1429-1435.
- Kong X, Nie L, Zhang H, et al (2016): Do 3d printing models improve anatomical teaching about hepatic segments to medical students? A randomized controlled study. World J Surg, 40, 1969-1976.
- Li J, Nie L, Li Z, et al (2012): Maximizing modern distribution of complex anatomical spatial information: 3D reconstruction and rapid prototype production of anatomical corrosion casts of human specimens. Anat Sci Educ, 5, 330-339.
- Li K, Kui C, Lee E, et al (2017): The role of 3D printing in anatomy education and surgical training: A narrative review. MedEdPublish, 6, 31.
- Massari CHAL, Pinto ACBCF, De Carvalho YK, et al (2019): Volumetric computed tomography reconstruction, rapid prototyping and 3D printing of opossum head (Didelphis albiventris). Int J Morphol, 37, 838-844.
- Nomina Anatomica Veterinaria (2017): International Committee on Veterinary Gross Anatomical Nomenclature (ICVGAN), Prepared by the international committee on veterinary gross anatomical nomenclature and authorized by the general assambly of the world association of veterinary anatomists. Sixth Edition, The Editorial Committee Hanover (Germany), Ghent (Belgium), Columbia, MO (U.S.A.), Rio de Janeiro (Brazil).
- O'Brien HD (2017): Cranial arterial patterns of the alpaca (Camelidae: Vicugna pacos). R Soc Open Sci, 4, 160967.
- Ocal MK, Erden H, Ogut I, et al (1999): A quantitative study of the circulus arteriosus cerebri of the camel (Camelus dromedarius). Anat Hist Embryol, 28, 271-272.
- Selle D, Preim B, Schenk A, et al (2002): Analysis of vasculature for liver surgical planning. IEEE Trans Med Imaging, 21, 1344-1357.
- Shatri J, Cerkezi S, Ademi V, et al (2019): Anatomical variations and dimensions of arteries in the anterior part of the circle of Willis. Folia Morphol, 78, 259–266.
- Simoens P, Lauwers H, De Geest, et al (1987): Functional morphology of the cranial retia mirabilia in the domestic mammals. Schweiz Arch Tierheilkd, 129, 295-307.
- Wang XR, Liu Y, Zhang LP, et al (2012): Comparative anatomical study of the epidural retia mirabile in the yak and cattle. Asian J Anim Vet, 7, 884-890.
There are 21 citations in total.
Details
| Primary Language | English |
|---|---|
| Subjects | Veterinary Surgery |
| Journal Section | Research Article |
| Authors | |
| Publication Date | September 30, 2022 |
| Published in Issue | Year 2022Volume: 69 Issue: 4 |
