Araştırma Makalesi
PDF EndNote BibTex RIS Kaynak Göster

Evaluation of the compatibility between corrosion casts and 3D reconstruction of pig head arterial system on cone beam computed tomography

Yıl 2022, Cilt 69, Sayı 4, 419 - 424, 30.09.2022
https://doi.org/10.33988/auvfd.884974

Öz

This study aimed to compare the corrosion cast models of the porcine head arterial system with three-dimensional (3D) reconstructions using cone beam computed tomography (CBCT) of these cast models. Six heads from sows were simultaneously injected through both carotid arteries with Duracryl Plus for corrosion cast technique and an additional head, also from another one sow head, was filled with saturated lead tetroxide (Pb3O4) in a 10% hot water solution (40°C) of gelatin for CBCT study. Two-dimensional (2D) images were stored in Digital Imaging and Communications in Medicine (DICOM). Subsequently, segmentation and post-processing of these images were performed by using various software programs. The 3D models were found to be compatible with the corrosion cast models. It was observed that osseous structures and arteries were clearly identified on CBCT images. Specimen scan, segmentation, and post segmentation had a duration of 10-15 minutes, 4 hours, and 15 minutes, respectively. The internal carotid artery, external carotid artery, and its main branches were seen well on 3D models. In conclusion, it is considered that 3D models and images can be effectively used in anatomy education, radiological evaluations, pathological and variational investigations.

Kaynakça

  • Aiyan AA, Menon P, AlDarwich A, et al (2019): Descriptive analysis of cerebral arterial vascular architecture in dromedary camel (Camelus dromedarius). Front Neuroanat, 13, 67.
  • Brudnicki W (2011): Morphometric analysis of the brain base arteries in fallow deer (Dama dama). Vet Med, 56, 462–468.
  • Chen S, Pan Z, Wu Y, et al (2017): The role of three-dimensional printed models of skull in anatomy education: a randomized controlled trail. Sci Rep, 7, 575.
  • Cornillie P, Casteleyn C, von Horst C, et al (2019): Corrosion casting in anatomy: Visualizing the architecture of hollow structures and surface details. Anat Hist Embryol, 48, 591-604.
  • De Sordi N, Bombardi C, Chiocchetti R, et al (2014): A new method of producing casts for anatomical studies. Anat Sci Int, 89, 255-265.
  • Eberlova L, Liska V, Mirka H, et al (2017): The use of porcine corrosion casts for teaching human anatomy. Ann Anat, 213, 69-77.
  • Estai M, Bunt S (2016): Best teaching practices in anatomy education: A critical review. Ann Anat, 208, 151-157.
  • Fedorov A, Beichel R, Kalpathy-Cramer J, et al (2012): 3d slicer as an image computing platform for the quantitative imaging network. Magn Reson Imagin, 30, 1323–1341.
  • Hermiz DJ, O'Sullivan DJ, Lujan HL, et al (2011): Constructivist learning of anatomy: gaining knowledge by creating anatomical casts. Anat Sci Educ, 4, 98-104.
  • Jerbi H, Khaldi S, Pérez W (2016): Morphometric study of the rostral epidural rete mirabile in the dromedary (Camelus dromedarius, Linnaeus 1758). Int J Morphol, 34, 1429-1435.
  • Kong X, Nie L, Zhang H, et al (2016): Do 3d printing models improve anatomical teaching about hepatic segments to medical students? A randomized controlled study. World J Surg, 40, 1969-1976.
  • Li J, Nie L, Li Z, et al (2012): Maximizing modern distribution of complex anatomical spatial information: 3D reconstruction and rapid prototype production of anatomical corrosion casts of human specimens. Anat Sci Educ, 5, 330-339.
  • Li K, Kui C, Lee E, et al (2017): The role of 3D printing in anatomy education and surgical training: A narrative review. MedEdPublish, 6, 31.
  • Massari CHAL, Pinto ACBCF, De Carvalho YK, et al (2019): Volumetric computed tomography reconstruction, rapid prototyping and 3D printing of opossum head (Didelphis albiventris). Int J Morphol, 37, 838-844.
  • Nomina Anatomica Veterinaria (2017): International Committee on Veterinary Gross Anatomical Nomenclature (ICVGAN), Prepared by the international committee on veterinary gross anatomical nomenclature and authorized by the general assambly of the world association of veterinary anatomists. Sixth Edition, The Editorial Committee Hanover (Germany), Ghent (Belgium), Columbia, MO (U.S.A.), Rio de Janeiro (Brazil).
  • O'Brien HD (2017): Cranial arterial patterns of the alpaca (Camelidae: Vicugna pacos). R Soc Open Sci, 4, 160967.
  • Ocal MK, Erden H, Ogut I, et al (1999): A quantitative study of the circulus arteriosus cerebri of the camel (Camelus dromedarius). Anat Hist Embryol, 28, 271-272.
  • Selle D, Preim B, Schenk A, et al (2002): Analysis of vasculature for liver surgical planning. IEEE Trans Med Imaging, 21, 1344-1357.
  • Shatri J, Cerkezi S, Ademi V, et al (2019): Anatomical variations and dimensions of arteries in the anterior part of the circle of Willis. Folia Morphol, 78, 259–266.
  • Simoens P, Lauwers H, De Geest, et al (1987): Functional morphology of the cranial retia mirabilia in the domestic mammals. Schweiz Arch Tierheilkd, 129, 295-307.
  • Wang XR, Liu Y, Zhang LP, et al (2012): Comparative anatomical study of the epidural retia mirabile in the yak and cattle. Asian J Anim Vet, 7, 884-890.

Yıl 2022, Cilt 69, Sayı 4, 419 - 424, 30.09.2022
https://doi.org/10.33988/auvfd.884974

Öz

Kaynakça

  • Aiyan AA, Menon P, AlDarwich A, et al (2019): Descriptive analysis of cerebral arterial vascular architecture in dromedary camel (Camelus dromedarius). Front Neuroanat, 13, 67.
  • Brudnicki W (2011): Morphometric analysis of the brain base arteries in fallow deer (Dama dama). Vet Med, 56, 462–468.
  • Chen S, Pan Z, Wu Y, et al (2017): The role of three-dimensional printed models of skull in anatomy education: a randomized controlled trail. Sci Rep, 7, 575.
  • Cornillie P, Casteleyn C, von Horst C, et al (2019): Corrosion casting in anatomy: Visualizing the architecture of hollow structures and surface details. Anat Hist Embryol, 48, 591-604.
  • De Sordi N, Bombardi C, Chiocchetti R, et al (2014): A new method of producing casts for anatomical studies. Anat Sci Int, 89, 255-265.
  • Eberlova L, Liska V, Mirka H, et al (2017): The use of porcine corrosion casts for teaching human anatomy. Ann Anat, 213, 69-77.
  • Estai M, Bunt S (2016): Best teaching practices in anatomy education: A critical review. Ann Anat, 208, 151-157.
  • Fedorov A, Beichel R, Kalpathy-Cramer J, et al (2012): 3d slicer as an image computing platform for the quantitative imaging network. Magn Reson Imagin, 30, 1323–1341.
  • Hermiz DJ, O'Sullivan DJ, Lujan HL, et al (2011): Constructivist learning of anatomy: gaining knowledge by creating anatomical casts. Anat Sci Educ, 4, 98-104.
  • Jerbi H, Khaldi S, Pérez W (2016): Morphometric study of the rostral epidural rete mirabile in the dromedary (Camelus dromedarius, Linnaeus 1758). Int J Morphol, 34, 1429-1435.
  • Kong X, Nie L, Zhang H, et al (2016): Do 3d printing models improve anatomical teaching about hepatic segments to medical students? A randomized controlled study. World J Surg, 40, 1969-1976.
  • Li J, Nie L, Li Z, et al (2012): Maximizing modern distribution of complex anatomical spatial information: 3D reconstruction and rapid prototype production of anatomical corrosion casts of human specimens. Anat Sci Educ, 5, 330-339.
  • Li K, Kui C, Lee E, et al (2017): The role of 3D printing in anatomy education and surgical training: A narrative review. MedEdPublish, 6, 31.
  • Massari CHAL, Pinto ACBCF, De Carvalho YK, et al (2019): Volumetric computed tomography reconstruction, rapid prototyping and 3D printing of opossum head (Didelphis albiventris). Int J Morphol, 37, 838-844.
  • Nomina Anatomica Veterinaria (2017): International Committee on Veterinary Gross Anatomical Nomenclature (ICVGAN), Prepared by the international committee on veterinary gross anatomical nomenclature and authorized by the general assambly of the world association of veterinary anatomists. Sixth Edition, The Editorial Committee Hanover (Germany), Ghent (Belgium), Columbia, MO (U.S.A.), Rio de Janeiro (Brazil).
  • O'Brien HD (2017): Cranial arterial patterns of the alpaca (Camelidae: Vicugna pacos). R Soc Open Sci, 4, 160967.
  • Ocal MK, Erden H, Ogut I, et al (1999): A quantitative study of the circulus arteriosus cerebri of the camel (Camelus dromedarius). Anat Hist Embryol, 28, 271-272.
  • Selle D, Preim B, Schenk A, et al (2002): Analysis of vasculature for liver surgical planning. IEEE Trans Med Imaging, 21, 1344-1357.
  • Shatri J, Cerkezi S, Ademi V, et al (2019): Anatomical variations and dimensions of arteries in the anterior part of the circle of Willis. Folia Morphol, 78, 259–266.
  • Simoens P, Lauwers H, De Geest, et al (1987): Functional morphology of the cranial retia mirabilia in the domestic mammals. Schweiz Arch Tierheilkd, 129, 295-307.
  • Wang XR, Liu Y, Zhang LP, et al (2012): Comparative anatomical study of the epidural retia mirabile in the yak and cattle. Asian J Anim Vet, 7, 884-890.

Ayrıntılar

Birincil Dil İngilizce
Konular Veteriner Hekimlik
Bölüm Araştırma Makalesi
Yazarlar

Nikolay TSANDEV Bu kişi benim
Department of Veterinary Anatomy, Histology and Embryology, Faculty of Veterinary Medicine, Trakia University
0000-0003-1960-2987
Bulgaria


Caner BAKICI> (Sorumlu Yazar)
Ankara University, Faculty of Veterinary Medicine, Department of Anatomy
0000-0003-2413-3142
Türkiye


Angel VODENİCHAROV>
Department of Veterinary Anatomy, Histology and Embryology, Faculty of Veterinary Medicine, Trakia University
0000-0001-6094-7800
Bulgaria

Yayımlanma Tarihi 30 Eylül 2022
Yayınlandığı Sayı Yıl 2022, Cilt 69Sayı 4

Kaynak Göster

Bibtex @araştırma makalesi { auvfd884974, journal = {Ankara Üniversitesi Veteriner Fakültesi Dergisi}, issn = {1300-0861}, eissn = {1308-2817}, address = {}, publisher = {Ankara Üniversitesi}, year = {2022}, volume = {69}, number = {4}, pages = {419 - 424}, doi = {10.33988/auvfd.884974}, title = {Evaluation of the compatibility between corrosion casts and 3D reconstruction of pig head arterial system on cone beam computed tomography}, key = {cite}, author = {Tsandev, Nikolay and Bakıcı, Caner and Vodenicharov, Angel} }
APA Tsandev, N. , Bakıcı, C. & Vodenicharov, A. (2022). Evaluation of the compatibility between corrosion casts and 3D reconstruction of pig head arterial system on cone beam computed tomography . Ankara Üniversitesi Veteriner Fakültesi Dergisi , 69 (4) , 419-424 . DOI: 10.33988/auvfd.884974
MLA Tsandev, N. , Bakıcı, C. , Vodenicharov, A. "Evaluation of the compatibility between corrosion casts and 3D reconstruction of pig head arterial system on cone beam computed tomography" . Ankara Üniversitesi Veteriner Fakültesi Dergisi 69 (2022 ): 419-424 <http://vetjournal.ankara.edu.tr/tr/pub/issue/72819/884974>
Chicago Tsandev, N. , Bakıcı, C. , Vodenicharov, A. "Evaluation of the compatibility between corrosion casts and 3D reconstruction of pig head arterial system on cone beam computed tomography". Ankara Üniversitesi Veteriner Fakültesi Dergisi 69 (2022 ): 419-424
RIS TY - JOUR T1 - Evaluation of the compatibility between corrosion casts and 3D reconstruction of pig head arterial system on cone beam computed tomography AU - NikolayTsandev, CanerBakıcı, AngelVodenicharov Y1 - 2022 PY - 2022 N1 - doi: 10.33988/auvfd.884974 DO - 10.33988/auvfd.884974 T2 - Ankara Üniversitesi Veteriner Fakültesi Dergisi JF - Journal JO - JOR SP - 419 EP - 424 VL - 69 IS - 4 SN - 1300-0861-1308-2817 M3 - doi: 10.33988/auvfd.884974 UR - https://doi.org/10.33988/auvfd.884974 Y2 - 2021 ER -
EndNote %0 Ankara Üniversitesi Veteriner Fakültesi Dergisi Evaluation of the compatibility between corrosion casts and 3D reconstruction of pig head arterial system on cone beam computed tomography %A Nikolay Tsandev , Caner Bakıcı , Angel Vodenicharov %T Evaluation of the compatibility between corrosion casts and 3D reconstruction of pig head arterial system on cone beam computed tomography %D 2022 %J Ankara Üniversitesi Veteriner Fakültesi Dergisi %P 1300-0861-1308-2817 %V 69 %N 4 %R doi: 10.33988/auvfd.884974 %U 10.33988/auvfd.884974
ISNAD Tsandev, Nikolay , Bakıcı, Caner , Vodenicharov, Angel . "Evaluation of the compatibility between corrosion casts and 3D reconstruction of pig head arterial system on cone beam computed tomography". Ankara Üniversitesi Veteriner Fakültesi Dergisi 69 / 4 (Eylül 2022): 419-424 . https://doi.org/10.33988/auvfd.884974
AMA Tsandev N. , Bakıcı C. , Vodenicharov A. Evaluation of the compatibility between corrosion casts and 3D reconstruction of pig head arterial system on cone beam computed tomography. Ankara Univ Vet Fak Derg. 2022; 69(4): 419-424.
Vancouver Tsandev N. , Bakıcı C. , Vodenicharov A. Evaluation of the compatibility between corrosion casts and 3D reconstruction of pig head arterial system on cone beam computed tomography. Ankara Üniversitesi Veteriner Fakültesi Dergisi. 2022; 69(4): 419-424.
IEEE N. Tsandev , C. Bakıcı ve A. Vodenicharov , "Evaluation of the compatibility between corrosion casts and 3D reconstruction of pig head arterial system on cone beam computed tomography", Ankara Üniversitesi Veteriner Fakültesi Dergisi, c. 69, sayı. 4, ss. 419-424, Eyl. 2022, doi:10.33988/auvfd.884974